Flooring cost in Amarillo, by material
These are the same figures behind the material comparison table on the homepage, pulled 2026-09-05 and rechecked quarterly. "Amarillo-specific source" means the range comes from Amarillo-market data; "Texas statewide" means the closest figure available is a Texas-wide one; "national" means no local or state figure exists and the number shown is a labeled proxy rather than an invented local one.
| Material | Cost, installed | Typical | Source & scope |
|---|---|---|---|
| Hardwood (install) | ~$8 / sq ft | About $8,000 for a 1,000 sq ft home, materials + labor | Amarillo-specific source Homeyou, Amarillo-specific hardwood installation page, September 2026 |
| Hardwood (refinish) | ~$3 / sq ft | About $3,564–$3,887 for a 1,200 sq ft floor; $300–$1,500 per room | Amarillo-specific source Homeyou, Amarillo-specific refinishing page (12 Amarillo quotes), August 2026 |
| LVP / Vinyl Plank | $2.50–$4 / sq ft | Budget-tier vinyl plank material alone runs about $1.72–$2.17/sq ft locally | Amarillo-specific source Homeyou Amarillo page (installed range); Carpet World Amarillo published pricing (material), September 2026 |
| Laminate | $5.50–$6 / sq ft | About $2,800 for a 500 sq ft room; Texas statewide runs $2.75–$10 | Amarillo-specific source Homeyou Amarillo page (installed range); Texas statewide band from a 2026 Texas laminate cost catalog, September 2026 |
| Carpet | $3.58–$5.59 / sq ft | Averages $4.59/sq ft; budget-tier carpet material alone runs $0.97–$2.45/sq ft locally | Amarillo-specific source ProMatcher Amarillo carpet-installation data (installed); Carpet World Amarillo published pricing (material), September 2026 |
| Tile | ~$4–$25+ / sq ft | Budget ceramic material from ~$0.60/sq ft plus ~$3.25–$4.50/sq ft local install labor; premium porcelain and stone run far higher | Amarillo-specific source Homeyou Amarillo page (material floor); Amarillo contractor-network install-labor quotes; top end is a HomeGuide national proxy ($10–$50/sq ft installed), September 2026 |
Per-square-foot figures are materials plus labor for a typical installation. Tile's range is the widest because "tile" spans budget ceramic to large-format porcelain and natural stone — the tile page breaks that spread down.
What a whole project costs
Two Amarillo-specific sources put a number on the whole job, and they disagree — not because one is wrong, but because they mix job sizes differently. Both are shown rather than blended into a single average that would describe nobody's actual project.
| Project total | Typical | What it skews toward | Source |
|---|---|---|---|
| $729–$5,478 | Most projects $2,034–$2,931 | Skews toward single-room and small whole-room jobs | Homeyou, Amarillo-specific flooring page, September 2026 |
| $3,728–$11,183 | Most homeowners around $6,710 | Skews toward multi-room and whole-home replacement | RemodelerIQ, Amarillo flooring figure, September 2026 |
A 300 sq ft bedroom in LVP lands near the bottom of the first range. A 1,000 sq ft hardwood job — about $8,000 at Amarillo's rate — sits inside the second. Use the per-material figure and your real square footage rather than either total.
The slab-foundation line items most quotes don't itemize
The City of Amarillo's own residential foundation manual notes that the majority of Texas foundations are shallow slab-on-ground, many on expansive clays. That matters for flooring because moisture comes up through a slab from below, and because a slab on clay moves. A few line items follow from that — only one has a sourced local price, so the rest are listed as things to ask for, not numbers to expect.
| Slab add-on | Cost | Source & scope |
|---|---|---|
| 6-mil polyethylene vapor barrier under a floating floor (laminate, some LVP, engineered hardwood) | $0.20–$0.30 / sq ft | Texas statewide source — no Amarillo-specific figure found2026 Texas laminate installation cost catalog, April 2026 |
| Slab moisture test (ASTM F2170 in-situ probe or ASTM F1869 calcium chloride) | Ask for it as a line item — no local price found | National average — no Amarillo or Texas figure foundTest method names only; pricing not sourced |
| Self-leveling underlayment where the slab is out of flat | Ask for it as a line item — no local price found | National average — no Amarillo or Texas figure foundPricing not sourced |
| Crack-isolation membrane under tile over a cracked or expansive-clay slab | Ask for it as a line item — no local price found | National average — no Amarillo or Texas figure foundPricing not sourced |
The full slab foundation & vapor barrier guide explains which materials need which of these, and what a moisture test result actually means.
Go deeper on the material you're actually installing
- Hardwood Flooring Cost & Installation — solid vs. engineered, why engineered is the slab-friendly pick, and refinishing as a separate cheaper lane with a real Amarillo figure.
- LVP / Vinyl Plank Flooring Cost — click-lock vs. glue-down, wear layer and rigid core, and why it's the default answer on a slab.
- Laminate Flooring Cost & Installation — AC ratings, the vapor-barrier requirement over a slab, and where it still beats LVP.
- Carpet Installation Cost — fiber and pad, per-step stair pricing, and what a complete carpet quote itemizes.
- Tile Installation Cost — why the range is so wide, ceramic vs. porcelain vs. stone, and crack isolation over a clay slab.
- Hardwood Floor Refinishing Cost — screen-and-recoat vs. full sand, priced from actual Amarillo quotes.
What moves any flooring quote, regardless of material
- Slab or subfloor condition. A slab that tests wet, sits out of flat, or has active cracks needs work before anything goes down. Ask every bidder whether they tested the slab or are quoting blind — on an Amarillo slab, that single question separates careful installers from the rest.
- Removal and disposal of the old floor. Rarely included by default. Confirm whether a quote covers tear-out, haul-away, and disposal fees.
- Room shape and transitions. Closets, cabinet cutouts, and transitions between rooms or materials add labor a square-footage number never captures.
- Material grade within the category. "Hardwood" spans a wide band by species and finish; "tile" spans a wider one. The per-material pages break each out.
- Furniture and appliances. Working around a furnished house costs more than an empty room. Some companies move furniture for a fee, some expect it cleared.
Getting an apples-to-apples quote
Flooring quotes are easy to compare on the bottom line and hard to compare on what's actually included. Before lining two up, confirm each one states:
- Exact material, grade, and product line — not just "LVP" or "tile."
- Whether the slab was moisture-tested, and whether a vapor barrier, self-leveler, or crack-isolation membrane is included or billed only if needed.
- Whether removal and disposal of the existing floor is included.
- Installation method — floating vs. glue-down changes the labor line.
- Underlayment or pad, if not built into the product.
- Total square footage the quote is based on, and how it was measured (waste factor included or not).
- Proof of general liability insurance — since Texas issues no flooring license, this is the document that matters.
Two quotes that look far apart sometimes describe two different jobs. Line them up on this list before deciding the cheaper one is actually cheaper.
Methodology — where these numbers come from
Amarillo-specific per-square-foot ranges (hardwood installation and refinishing, LVP/vinyl, laminate, carpet, tile) are compiled from a September 2026 Amarillo-market pull; the refinishing figure comes from a dozen Amarillo quotes (AMA-004). Where no Amarillo-specific figure exists — the slab vapor barrier (a Texas statewide figure), the top of the tile range, and old-flooring removal (labeled national proxies) — the range is labeled by scope rather than filled with an invented local number. Ranges are materials + labor for a typical installation and do not include subfloor repair, furniture moving, or old-flooring removal/disposal unless stated. Rechecked quarterly.
Verified 2026-09-05. Texas does not require a state contractor license for flooring installation, refinishing, or repair — it is not a TDLR-regulated trade (TX-002). That puts more of the vetting burden on you: ask any company for proof of general liability insurance, check their standing with the Better Business Bureau, and — for work that touches the subfloor or slab — confirm whether the job needs a City of Amarillo permit before work starts. The City of Amarillo does not issue contractor ID numbers, so a company citing a "city license number" for flooring work is a vetting red flag, not a credential (AMA-001). Verify permit requirements yourself with the City of Amarillo Building Safety Division at 806-378-3041.
Still choosing between materials? The contractor vetting guide covers what to check when there's no license to look up, and the Amarillo flooring companies overview lists real local operators by what they actually publish.